Skip to main content

MSCE Publications

Publications

You are here

Found 14 results

Author Title Type [ Year

]

Filters: Author is Y. Qi [Clear All Filters]

2016

Z. Liu, Qi, Y., Lin, Y. X., Chen, L., Lu, P., and Chen, L. Q., “Interfacial study on solid electrolyte interphase at Li metal anode: Implication for Li dendrite growth”, Journal of the Electrochemical Society, vol. 163, pp. A592–A598, 2016.

2014

D. J. Oliver, Paul, W., M. Ouali, E., Hagedorn, T., Miyahara, Y., Qi, Y., and Grütter, P. H., “One-to-one spatially matched experiment and atomistic simulations of nanometre-scale indentation”, Nanotechnology, vol. 25, 2014.

2013

F. G. Sen, Meng-Burany, X., Lukitsch, M. J., Qi, Y., and Alpas, A. T., “Low friction and environmentally stable diamond-like carbon (DLC) coatings incorporating silicon, oxygen and fluorine sliding against aluminum”, Surface and Coatings Technology, vol. 215, pp. 340–349, 2013.

F. G. Sen, Qi, Y., and Alpas, A. T., “Tribology of fluorinated diamond-like carbon coatings: First principles calculations and sliding experiments”, Lubrication Science, vol. 25, pp. 111–121, 2013.

2012

F. G. Sen, Qi, Y., and Alpas, A. T., “Anchoring platinum on graphene using metallic adatoms: A first principles investigation”, Journal of Physics Condensed Matter, vol. 24, 2012.

2011

P. E. Krajewski, Hector, L. G., Qi, Y., Mishra, R. K., Sachdev, A. K., Bower, A. F., and Curtin, W. A., “Atoms to autos: A multi-scale approach to modeling aluminum deformation”, JOM, vol. 63, pp. 24–32, 2011.

F. G. Sen, Qi, Y., and Alpas, A. T., “Material transfer mechanisms between aluminum and fluorinated carbon interfaces”, Acta Materialia, vol. 59, pp. 2601–2614, 2011.

A. A. Gharam, Lukitsch, M. J., Qi, Y., and Alpas, A. T., “Role of oxygen and humidity on the tribo-chemical behaviour of non-hydrogenated diamond-like carbon coatings”, Wear, vol. 271, pp. 2157–2163, 2011.

2010

V. B. Shenoy, Johari, P., and Qi, Y., “Elastic softening of amorphous and crystalline Li-Si Phases with increasing Li concentration: A first-principles study”, Journal of Power Sources, vol. 195, pp. 6825–6830, 2010.

2009

J. A. Yasi, Nogaret, T., Trinkle, D. R., Qi, Y., Hector, L. G., and Curtin, W. A., “Basal and prism dislocation cores in magnesium: Comparison of first-principles and embedded-atom-potential methods predictions”, Modelling and Simulation in Materials Science and Engineering, vol. 17, 2009.

D. K. Ward, Farkas, D., Lian, J., Curtin, W. A., Wang, J., Kim, K. S., and Qi, Y., “Engineering size-scaling of plastic deformation in nanoscale asperities”, Proceedings of the National Academy of Sciences of the United States of America, vol. 106, pp. 9580–9585, 2009.

Y. Qi, Sheldon, B. W., Guo, H., Xiao, X., and Kothari, A. K., “Impact of surface chemistry on grain boundary induced intrinsic stress evolution during polycrystalline thin film growth”, Physical Review Letters, vol. 102, 2009.

2008

X. Xiao, Sheldon, B. W., Qi, Y., and Kothari, A. K., “Intrinsic stress evolution in nanocrystalline diamond thin films with deposition temperature”, Applied Physics Letters, vol. 92, 2008.

2007

X. L. Wu, Qi, Y., and Zhu, Y. T., “Partial-mediated slips in nanocrystalline Ni at high strain rate”, Applied Physics Letters, vol. 90, 2007.